Today we are going to learn “How To Make A Face Mask at Home Step by Step”
Professional face masks are especially needed in hospitals. For private use, however, masks can be made from scraps of fabric.
Mouth-nose masks can also be sewn by themselves – at least makeshift masks. For the simplest variant, you don’t need to be an expert or a lot of sewing skills.
Important to know: The face mask does not protect against infection, but against the transmission of the virus if you are sick yourself.
How To Make A Face Mask at Home Step by Step
Step 1 – the material
It is best to take a densely woven cotton fabric of the dimensions 40 by 40 centimeters for the masks, advises the magazine “Burda Style” (online).
This should be washable at least 60 degrees. You also need a rubber band of 50 centimeters and a width of five millimeters.
A tip: If you don’t have the fabric or the rubber band at home or can’t buy it now, you might find an old T-shirt to cut or another no longer loved garment with an elastic band to take off at home.
In addition, around 20 centimeters of craft or floral wire and insoles for the masks for replacement is required.
This is either kitchen crepe, a highly filtered vacuum cleaner bag or a flushing sponge cloth with hygiene coating.
Step 2 – the preparation
The fabric is optimally washed first and also put into the dryer, if available, advises the “Burda Style”.
This prevents the sewn mask from running in later during washing. For the cut, the fabric should also be smoothed.
Sewing patterns are available online or you can draw them freehand depending on the head size.
Cutting patterns have about one centimeter of seam addition on each side – that is, the needle is placed one centimeter from the edge inwards.
Suitable filters for the face mask
“Burda Style” not only provides for a fabric layer but an inside and outside side, into which an inlay comes later.
For these, kitchen paper or vacuum cleaner bags are cut like the outer fabric part, but one additionally takes one centimeter away from the upper and lower edges. So the insoles fit well into the mask later.
Step 3 – Sewing
The two outer parts (left and right half of the mask) are now sewn together at the middle seam.
This is the easiest and easiest way to do this with a sewing machine, but of course, manual work is also possible.
The seam addition of the middle seam, which is now inside, is the best cut back to about five millimeters wide,
the DIY experts advise. On the curves maybe even a little more.
Further sewing is easier if you now iron the parts apart as they are later used.
The remaining seam addition of the middle seam can also be fastened with another seam – so this seam is later flattened, which can increase the wearing comfort.
The same is done with the two parts of the feed. Here additionally the narrow side edges with a zigzag or
overlock stitch of the sewing machine turn one centimeter far inward, so iron and then sew tightly.
The fabric for the inside is now placed on the outer piece and the upper and lower edges are sewn together.
The pages remain open so that the deposits can be pushed in later.
Step 4 – Elastic and Shape Adjust
The outer fabric of many sewing patterns is longer on the sides than the inner lining –
it is folded half inwards and sewn so tightly that a tunnel is created. Here thread the rubber band and tie its ends together to match the face.
In the seam tunnel at the upper edge of the mask, there is now a 16-centimeter long piece of wire,
the ends of which are bent for safety. This allows the mask to be adjusted to the face when it is put on.
Finally, there is the replaceable insert made of, for example, kitchen paper in the middle of the mask.
Step 5 – The Care
The masks are only safe if they are washed regularly. You should do this once a day at least 60 degrees.